{"product_id":"dalray-acrylic-sealer","title":"Dalray Acrylic Sealer","description":"\u003cp\u003e\u003cstrong\u003eDalray Acrylic Sealer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDalray Acrylic Sealer is a water-based clear protective coating selected specifically for use over Dalray Limewash.\u003c\/p\u003e\n\u003cp\u003eLimewash is naturally a breathable mineral finish, and wherever possible, we recommend leaving it unsealed to retain its natural movement, texture and character. However, walls in hallways, busy family homes, commercial spaces and other high-touch areas can benefit from additional protection.\u003c\/p\u003e\n\u003cp\u003eApplied over fully cured Dalray Limewash, our Acrylic Sealer helps reduce surface transfer and improves the durability of the finished surface, with minimal change to the look and character of the limewash.\u003c\/p\u003e\n\u003cp\u003eOur approach is simple: \u003cstrong\u003eseal the areas that need additional protection and leave the rest unsealed where practical.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProtection where you need it. Breathability where you don’t.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWater-based clear protective coating\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHelps reduce surface transfer and improve durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProvides additional protection for high-touch and hard-working interior walls\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCarefully selected for use with Dalray Limewash\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMinimal change to the look and character of the finish\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan be applied by brush, short-nap roller or spray\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInterior use only\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAvailable in 2L and 4L\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCoverage \u0026amp; application\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e Approximately 15m² per litre, per coat, depending on surface porosity, texture and application method.\u003c\/p\u003e\n\u003cp class=\"PDq2pG_selectionAnchorContainer\"\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e Apply 1–3 thin coats depending on the level of protection required. One coat may be sufficient for areas requiring light protection, while two to three coats can be applied where greater durability and protection are desired. Allow each coat to dry completely before recoating.\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Short-nap roller, brush or spray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecoat:\u003c\/strong\u003e Wait until the previous coat is completely dry before recoating. Under normal conditions (25°C), the coating may be touch dry in approximately 30 minutes and ready for recoating after approximately 3 hours. Allow longer in cold or humid conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull cure:\u003c\/strong\u003e Approximately 28 days.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eMasking:\u003c\/strong\u003e If masking over Dalray Limewash or Acrylic Sealer, always use a low-tack, sensitive-surface painter’s tape. Standard or high-tack masking tapes may lift or damage the limewash or sealed finish when removed. Remove tape slowly and carefully, and avoid leaving it in place longer than necessary.\u003c\/p\u003e\n\u003ch3\u003eImportant information\u003c\/h3\u003e\n\u003cp\u003eAlways test the sealer on a small, inconspicuous area before coating the entire surface.\u003c\/p\u003e\n\u003cp\u003eApplying an acrylic sealer will reduce the natural breathability and moisture-regulating properties of the limewash finish. Sealing may also slightly alter the colour depth, sheen, texture and mottling of the finished surface.\u003c\/p\u003e\n\u003cp\u003eFor this reason, we recommend using Dalray Acrylic Sealer selectively in areas where additional protection is needed, while leaving other limewashed surfaces unsealed where practical.\u003c\/p\u003e\n\u003cp\u003eDalray Acrylic Sealer is designed for interior use only. It is not suitable for areas subject to regular water saturation or pooling, or high-wear surfaces such as flooring and benchtops. It is not a waterproofing membrane and should not be relied upon to prevent water ingress.\u003c\/p\u003e","brand":"Dalray","offers":[{"title":"2 Litres","offer_id":48209718116578,"sku":"SEALER-2L","price":79.0,"currency_code":"AUD","in_stock":true},{"title":"4 Litres","offer_id":48209718083810,"sku":"SEALER-4L","price":129.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0742\/1899\/5938\/files\/Dalray_Acrylic_Sealer_4L_2L_web_417eef9b-3d97-4e4d-ae02-fcf53d0596cc.jpg?v=1786601015","url":"https:\/\/dalray.com.au\/products\/dalray-acrylic-sealer","provider":"Dalray","version":"1.0","type":"link"}